Publicidad
Idiomas disponibles
Idiomas disponibles
TV Settings
Channel Settings
1. Press MENU button, the setup window will appear on the screen.
2. Use
or
to highlight Channel mode.
3. Use
or
to highlight the item you would like to reset, then press
settings.
4. Press OK to confirm your selections or settings and enter the sub menus.
5. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
Note: For Cable or Satellite users with a set-top box, there is no need to run channel Auto Scan.
Connect your cable or satellite set top box to one of the available inputs on the TV for viewing.
Air/Cable
Set the reception type.
Press
Auto Scan
sub menu.
Add or delete a channel in
Favorite
the favorite list.
Show or hide v il ble
Show/Hide
ch nnels lre dy in
memory.
Select a channel number
Channel No.
to be labeled
DTV Signal
Dynamically display the DTV signal status.
30
Channel Menu
Press
●
Select Air when TV is connected to an indoor / outdoor antenna.
●
Select Cable if you subscribe to a pay television service WITHOUT a set top
box.
Cable System
or OK to enter
Start to Scan
Press
channel in the favorite list.
Press
channel.
Press
CCD-0005609 REV. 07.06.2023
or
to select Air or Cable.
Press
or
to select Auto, STD, IRC or HRC.
(Only available when you select Cable as the reception type.)
Press
or OK to start scanning available channels..
or
to select a channel, then press
or
to select a channel, then press
or
to select a channel.
or
to select the
or OK to add or delete the
or OK to show or hide the
Publicidad
