Replacing The Fuse; Technical Specifications - EuroLite LED QMS-8 RGB Manual Del Usuario

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Controller:
Power supply:
Power consumption:
Sound-control:
Dimensions (LxWxH):
Weight:
Fuse:
Luminaries:
Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 20.04.2004 ©
220-250 V AC, 50 Hz ~
95 W
via built-in microphone
305 x 160 x 75 mm
3 kg
F 1.5 A, 250 V
12 V
14 W x 4
200 x 150 x 165 mm
1.6 kg
21/39 51930260_V_1_1.DOC