3
Repeat step 2 to set the "Play" or "Skip"
mode on all the tracks.
4
Press (3) (PLAY MODE) for two seconds.
5
Press (SHIFT).
Notes
• You can set the "Play" and "Skip" modes on up to 24
tracks.
• You cannot set the "Skip" mode on all the tracks.
Playing the specific tracks only
You can select:
• Bank on to play the tracks with the "Play"
setting.
• Bank inv (inverse) to play the tracks with the
"Skip" setting.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
"Bank" appears.
2
Press (4) (n) repeatedly until the
desired setting appears.
z Bank on
z Bank inv
C D 1
SUR EQ
Bank on
PLAY MODE
Playback starts from the track following the
current one.
3
Press (SHIFT).
To go back to the normal playback mode,
select "Bank off" in step 2 above.
z Bank off
BANK
Additional
Information
Precautions
• If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.
• If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
• If no sound comes from the speakers of a
two-speaker system, set the fader control to
the center position.
• If your car is equipped with a power
antenna, note that it will extend
automatically while the tuner function is
selected.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
To maintain high quality sound
If you have drink holders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio. Sugary
residues on this unit or cassette tapes may
contaminate the playback heads, reduce the
sound quality, or prevent sound reproduction
altogether.
Cassette cleaning kits do not remove sugar
from the tape heads.
EN
15