Kenmore 111.22142 Manual De Uso Y Cuidado página 10

6. Remove the plug from the front bottom
left of cabinet and insert it into the hole
on the front bottom right. Remove the
screw (if present) from the underside of
the front bottom edge. Use the 5 screws
from step 6 to attach the left lower hinge
to the left side of the appliance bottom.
Reinsert the leveling footon both sides of
the cabinet.
7. Remove the metal door stopper and
plastic door closer from the lower right
corner of the door. Use the removed
screw to attach the door stopper and left
door closer to lower left corner of door.
8. With the aid of an assistant, carefully
raise the appliance back to upright
position. NOTE: Once the appliance is
raised back up to vertical position, it must
remain upright for 6 hours before
plugging in to avoid damage to internal
components.
9. With aid of assistant, mount the door
onto the lower left hinge. Insert the hinge
pin into the door, and use the 3 bolts
removed in step 2 to attach the left top
hinge to left top corner of cabinet.
10. Use a flat blade screwdriver to carefully
pry the wire harness base out of its clip in
the right hinge cover. Carefully insert
harness base into clip in left hinge cover.
Pull cabinet wire harness section up from
recess in left top corner of cabinet.
Connect the two harness sections
together. Use the 2 screws removed in
step 1 to attach the left hinge cover to the
left corner of cabinet.
10