Aqua Medic AC Runner 3.2 Manual De Instrucciones página 5

Circulation pump for fresh and salt water aquaria
In purchasing this pump, you have selected a top quality product. It has been specifically developed for aquarium
use and extensively tested by experts.
1. Scope of delivery
 AC Runner – for parts, please refer to Fig. 2 resp. 3
2. Safety instructions
- When working in the aquarium, always disconnect all units from the power supply system before putting your
hands into the water. Connect all units to the mains via a residual current device with a maximum residual
current of 30 mA.
- Never pull pumps out of the water by the cable.
- Suitable for indoor use only.
- Regularly clean pumps from dirt and lime deposits.
- Not suitable as a toy for children.
3. Features and Functionality
The AC Runner are magnetically coupled current pumps and have a fully encapsulated synchronous motor. All
materials are salt-water resistant.
The AC Runner are suitable for installation under water and out of water.
4. Technical Data
Type AC Runner 3.2
Power supply 220-240 V / 50 Hz
pump:
Pump power: up to 3,000 l/h
Max. head: up to 2.7 m
Power max. 27 watts
consumption:
Connection 32 mm / 1 ¼ inch
suction side:
Connection 25 mm / 1 inch
pressure side:
Protection IP X8
rating:
Fig. 1: Power chart AC-Runner
Operation Manual ENG
AC Runner 5.2
220-240 V / 50 Hz
up to 5,000 l/h
up to 4.2 m
max. 44 watts
32 mm / 1 ¼ inch
32 mm / 1 ¼ inch
IP X8
AC Runner 9.2 AC Runner 12.2
220-240 V / 50 Hz 220-240 V / 50 Hz
up to 9,000 l/h up to 12,000 l/h
up to 5 m up to 5.5 m
max. 78 watts max. 92 watts
40 mm / 1 ½ inch 40 mm / 1 ½ inch
40 mm / 1 ½ inch 40 mm / 1 ½ inch
IP X8 IP X8
5