Publicidad
Idiomas disponibles
Idiomas disponibles
not in this position, pull the upper cold tip (8) outwards and, at the
same time, turn it 180 degrees to the right (Fig. D) so that they face
inwards. Repeat the step with the lower cold tip (8).
•
Put the top protective cover (9a) back on, resting it about 1 cm from
the attachment base, and slide it down until the 2 hooks fit into their
positions (Fig E).
•
Put the bottom protective cover (9b) back on, resting it about 1 cm
from the attachment base, and slide it down until the 3 hooks fit into
their positions (Fig F).
•
Connect the power cable (5) to the mains.
•
Switch the styler on by sliding the O/I (4) button to the left.
•
Select the desired temperature from the 4 temperatures available
(150°C - 170°C - 190°C - 210°C) by pressing the + or - buttons (3)
•
The styler is ready for use when the temperature on the display (2)
stops flashing
•
To activate the key lock, press and hold the + button for a few
seconds.
•
To create waves: use one hand to pull the lock of hair and, starting
from the roots, insert it between the heated parts (1) with the other,
then close the product and hold it pressed for a few seconds.
Repeat the styling operation along the entire length of the hair.
•
For straight hair: use one hand to pull the lock of hair and with the
other insert it between the heated parts (1), then close the styler
and slide it from the roots to the ends. You can use a comb to do so.
Continue in the same way with each lock of hair.
•
When you have finished styling your hair, switch the appliance off
by sliding the button (4) to the right to O and disconnect it from the
socket.
•
Let the appliance cool completely.
•
Use the specific closing lock (6) to close and store the styler.
o n .
MAINTENANCE AND CLEANING
WARNING! Always disconnect the
appliance from the socket before
cleaning or performing maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
•
Disconnect the appliance from the mains.
•
Make sure the appliance is cool.
•
Clean the external and internal surfaces of the heated parts (1)
and the handle of the appliance using a soft and damp cloth.
•
Let it dry completely before switching it on again.
14
EN
Publicidad
