Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Clean and Maintenance
1.
Unplug the power cord and let the coffee maker cool down completely
before cleaning.
2.
Clean the housing of coffee maker with moisture-proof sponge often and
clean water tank, drip tray and removable shelf regularly under warm
running water.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the
housing in water for cleaning.
3.
Detach the filter holder through turn it anticlockwise, get rid of coffee
residue inside, then you can clean it with a cleaner, but at last you must
rinse the parts with clear water.
4.
Clean all the attachments and dry thoroughly.
Cleaning mineral deposits
To make sure your coffee maker operating efficiently, you should clean away
the mineral deposits left every 2-3 months. To do this:
1. Fill the tank with water and descaler to the MAX level (the scale of water
and descaler is 4:1); the detail refers to the instruction of descaler. Please use
"household descaler". You can use also the citric acid instead of the
descaler (the relation is three parts of water and one part of citric acid).
2. Operate the appliance for two cycles following the steps for making
espresso and frothing milk and rinse the device with the water /descaler
mixture.
3. Following this, and to flush out any traces of descaler or citric acid, operate
the coffee maker for a further two cycles but with water only.
Technical Data
Model:
Power supply:
Power consumption:
Protection class:
Instructions for use
CM-850.004A
220 -240V~, 50 Hz
850W
Class Ι
English
7
Publicidad
Tabla de contenido
