Publicidad
Idiomas disponibles
Idiomas disponibles
sories are used to replace existing parts/accessories.
♦ CAUTION: There is a risk of fire if the appliance's clean-
ing is not done according to these instructions.
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
Thermostat switch
A
Power switch
B
C
Oscillation switch
D
Plugged in pilot light
E
Carry handle
If the model of your appliance does not have the accesso-
ries described above, they can also be bought separately
from the Technical Assistance Service.
INSTRUCTIONS FOR USE
Before use:
♦ Make sure that all products' packaging has been
removed.
♦ To eliminate the smell given off by the appliance when
used for the first time, it is recommended to have it on at
full power for 2 hours in a well-ventilated room.
♦ Prepare the appliance according to the function you
wish to use:
Use:
♦
Extend the cable completely before plugging
it in.
♦ Connect the appliance to the mains.
♦
Guide the appliance to direct the flow of air
in the desired direction.
♦ Turn the appliance on, by using the power
selection knob (B).
♦
Select the desired power.
♦
Turn the thermostat control (A) to the desired
temperature position.
Fan function:
♦
Select the fan position.
♦ Check that the thermostat button is set to the
maximum, the fan does not operate with the thermostat
at minimum
Heater function:
♦
Select the desired heating power.
♦
Check that the thermostat control is set to the
temperature required.
♦ The pilot light (D) will turn on.
(Original instructions)
Oscillation function
♦ The oscillation function makes it possible to direct
the flow from the apparatus so that it automatically
alternates over a range of 75°
♦ To activate this function, use the oscillation switch
(C).
Once you have finished using the appli-
ance:
♦ Turn the appliance off, using the on/off switch.
♦ Unplug the appliance and allow it to coolm,
unplug from the mains.
♦ Clean the appliance.
CARRY HANDLE
♦ This appliance has a handle on the upper part (E) of
the body, which facilitates comfortable
transportation.
Anti-tipping safety device:
♦ The appliance has an anti-tipping safety device that
turns it off if the working position is not the correct one.
Safety thermal protector:
♦ The appliance has a safety device, which protects the
appliance from overheating.
♦ When the appliance switches itself on and off
repeatedly, for reasons other than the thermostat
control, check to ensure that there are no obstacles that
impede correct air entry or expulsion.
♦ If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply, and wait
for approximately 15 minutes before reconnecting. If the
machine does not start again seek authorised technical
assistance.
CLEANING
♦ Disconnect the appliance from the mains and allow it to cool
before undertaking any cleaning task.
♦ Clean the equipment with a damp cloth with a few drops of
washing-up liquid and then dry.
♦ Do not use solvents, or products with an acid or base pH such
as bleach, or abrasive products, for cleaning the appliance.
♦ Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
♦ Never submerge the appliance in water or any other liquid or
place it under running water.
♦ If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration of the
appliance's useful life and could become unsafe to use.
ENGLISH
5
Publicidad
