Zibro Kamin SRE 250 Instrucciones De Uso página 51

O
transportation cap
4
50
SRE 250
SRE 260
Do not remove any heater components yourself. Always contact your Zibro
Kamin dealer for repairs. When the power cord is damaged, it may only be
replaced by an authorised fitter. Use a new cord of the type H05 VV-F.
N
STORAGE (END OF THE HEATING SEASON)
At the end of the heating season, you must store the heater in a dust-free place, if
possible in its original packaging.
Unused fuel cannot be used in the next heating season. We therefore recommend
that you burn up all fuel. If there is still some fuel left, do not throw it away, but
dispose of it in accordance with the local regulations for the disposal of domestic
chemical waste.
Always start the new heating season with fresh fuel. When you start re-using the
heater follow the instructions again (starting from section A and as specified).
O
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1 Let the heater cool down.
Remove the removable tank ¶ from the heater and remove the fuel filter
2
(refer to Section M, Fig. N). Some drops may leak from the filter; keep a cloth
at hand. Store the fuel filter and the removable tank outside the heater.
3 Place the transportation cap into the position of the fuel filter (Fig. O).
Press it tight.
4 Always move the heater in an upright position.
P
SPECIFICATIONS SRE 250 (SPECIFICATIONS SRE 260)
Ignition
Fuel
Capacity (kW) max.
Capacity (kW) min.
Suitable space (m 3 ) **
Fuel consumption (l/hr)
Fuel consumption (g/hr)
Burning time per tank (hr)
Capacity removable tank (litres) 5.3 (7.1)
Weight (kg)
* At maximum setting
Q
WARRANTY PROVISIONS
Your heater comes with a 24-month warranty starting on the date of purchase.
Within this period all defects in material or workmanship will be repaired without
any charge. The following provisions shall apply regarding this warranty:
electrical Dimensions (mm)
paraffin (including base plate) depth
4.85 (6.1)
1.45 (2.55) Accessories
50-200 (95-255)
* 0.505 (0.635) Mains
* 404 (508)
* 10 (11) Electrical consumption igniter 368 W (240 W)
15 (21) Fuse rating
** Specified values are indicative
width 588 (704)
320 (355)
height 485 (560)
manual fuel pump
fuel cap cover, transportation cap
220V/230V
-- AC/50 Hz
continuous 38 W (44 W)
250V, 5A