Side fins
Your appliance is fitted with side fins which can
be activated to distribute the air more
efficiently.
Press the side fin key
activate their operation. The relevant
symbol
is displayed on the screen.
Press the same key again to close the fins.
The symbol disappears from the screen and
the fins close.
These fins are available in all operation
functions: cooling, dehumidification and air
purification.
The side fins close automatically when the
appliance is turned off via the "Off" key.
If the side fins were open prior to turning the
appliance off, they open again when the
appliance is turned back on.
Setting the clock / Programming the
timer
Setting the clock
❏ The current time (24-hour clock) is
displayed in the top left-hand corner of the
screen the first time the appliance is
connected to the mains electricity supply.
0:00 flashes by default.
❏ To set the time, it is necessary to turn the
appliance on by pressing the "On" key
If you take more than 10 seconds to
perform the next operation during
Instructions for Use
to open the fins and
.
programming / setting the clock on your
appliance, the screen automatically returns
to the main menu and the factory-set default
settings are displayed or, if this is not the
first time that the timer is set, the last
settings used are displayed on the screen.
❏ Press the "Timer" key
box appears on the timer menu with the last
function selected ("Off" is displayed by
default).
❏ Use the "up" key to place the selection box
on the time. The time is modified using the
"+" and "–" keys. The time increases or
decreases by one minute each time one of
these keys is pressed. Keep the key
pressed in to increase or decrease the
minutes more quickly.
39
. The selection