VOUNOT NSPW750-A Manual página 5

HOSE CONNECTION
The pump is equipped with a universal fitting which allows
connecting hoses of various sizes as listed below:
1. Connection for hoses of Ø 13 mm / 15 mm / 19 mm:
•
Cut off the topmost nipple on the universal fitting at the
position ⓐ
•
Screw a 25.4 mm tap adaptor onto the universal fitting.
•
Connect a hose quick connector (for hose of Ø 13 mm or 15
mm or 19 mm) to the tap adaptor, then insert the hose and
tighten it.
2. Connection for hose of Ø 25 mm:
•
Screw and push a hose of Ø 25 mm onto the universal
fitting without cutting anything.
•
Tighten the hose with a hose clamp.
3. Connection for hose of Ø 32 mm:
•
Cut off top two nipples on the universal fitting at the position
ⓑ.
•
Screw and push a hose of Ø 32 mm onto the universal
fitting.
•
Tighten the hose with a hose clamp.
Note: hose, tap adaptor, hose quick connector and hose
clamp are not provided.
5
EN
")
1
32 mm (1 /
4
05/2019