Technical Data; Preparations At The Workplace; Inserting The Battery; Removing The Battery - Hilti SL 6-A22 Instrucciones De Manejo

The brightness setting last selected is used again the next time the lamp
is switched on.
4

Technical data

Voltage
Brightness
Weight
4.1 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Operation

5.1 Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.1.1 Inserting the battery

CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible
click.
3. Check that the battery is seated securely.

5.1.2 Removing the battery

1. Press the release buttons on the battery.
2. Pull the battery out of its holder in the device.
14 English
Printed: 15.04.2019 | Doc-Nr: PUB / 5458869 / 000 / 02
SL 6-A22
21.6 V
3,000 lm
3.2 kg
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
2195844
*2195844*