English / USA
Definitions
1.
Starter grip.
The grip of the pull starter, which is
the device to start the engine.
2.
Filter cover.
Housing, which covers the air filter.
3.
Fuel pump
Provides additional fuel feed for a
cold start.
4.
Spark plug boot.
Connects the spark plug with the
ignition wire.
5.
Carburetor adjusting screw.
For tuning carburetor.
6.
Control handle.
The support handle for the left hand,
located at or toward the rear of the
hedge trimmer.
7.
Trigger interlock.
Must be depressed before
activating the throttle trigger.
8.
Slide control.
Lever for starting throttle and stop
switch.
9.
Throttle trigger.
Controls the speed of the engine.
26
10. Fuel filler cap.
For closing the fuel tank.
11. Fuel tank
For gasoline and oil mixture.
12. Muffler
Reduces engine exhaust noise and
directs the exhaust gases.
13. Fan housing.
Polymer housing which encloses
the power unit.
14. Choke lever
Eases engine starting by enriching
mixture.
15. Front handle (assist handle) with
hand guard.
Handle bar for the right hand at front
of hedge trimmer.
16. Cutting blades.
Steel blades for cutting hedges and
shrubs.
17. Cutting blade scabbard
Covers cutting blades when hedge
trimmer is not in use.
HS 86 R, HS 86 T