Publicidad
Assembly
ACCESORIES WITH SHOULDER (F)
• Move the retention lever towards the bottom of the
fastener until it exceeds the axis of the tool, as shown in
the image (G).
• Insert the accessory into the fastener.
• Return the lever toward the accesory to lock it (H).
• Make sure the shoulder is inside the retaining lever.
• Pull the bit to confirm that it is fully secured.
• To remove the accessory, pull the lever and remove the
accessory.
Adjustments
Auxiliary handle
Operate the power tool only with the
CAUTION
auxiliary handle installed (A).
• The auxiliary handle can be rotated to any position and
tilted back and forth for safe, low-fatigue positioning.
• Turn the auxiliary handle knob (B) counterclockwise to
loosen the mount (C) and place the auxiliary handle in
the desired position.
• Then retighten the auxiliary handle knob by turning
clockwise.
• Make sure the band of the mount (D) is positioned in
the proper section of the housing.
F
G
H
A
C
B
D
ENGLISH
7
Publicidad
