Description - Pentair INTELLIDRIVE PID10 Manual Del Usuario

Description

Specifications/Ratings
Input Voltage ........... 1-Phase 230VAC Nominal (190–265VAC)
Input Frequency ......................................................... 50/60Hz
Ambient Temperate Range ............ -4 to 122 °F (-20° to 50 °C)
Output Connections ..................3-Phase, 3-Wire/1-Phase or
Max Motor Cable Length .......................................... 1,000 feet
Enclosure .................................................................. NEMA 3R
Table 1 - Specifications
Model Motor Type*
2-WIRE 1-PHASE
PID10 3-WIRE 1-PHASE
3-PHASE
2-WIRE 1-PHASE 0.5–1.5 HP
PID20 3-WIRE 1-PHASE
3-PHASE
2-WIRE 1-PHASE 0.5–1.5 HP
PID30 3-WIRE 1-PHASE
3-PHASE
2-WIRE 1-PHASE 0.5–1.5 HP
PID50 3-WIRE 1-PHASE
3-PHASE
* Select drives by S.F. amps of pump motor.
The PENTEK INTELLIDRIVE is specifically designed
to operate 4" submersible pumps and 3-phase
above ground pumps in water well and residential
booster applications. Each Drive is rated for
maximum output amp rating. Any use of Drive
outside of intended design parameters will void
warranty. If Drive is used with above ground motors
not rated for a Variable Frequency Drive, maximize
motor life by limiting lead length to 25 ft. Refer to
Figure 1 - A typical residential installation layout
1-Phase/2-Wire
Maximum
HP Input
Output
Range Voltage
AMPS
9.5A
0.5–1 HP 7.5A
5A
11A
13.5A
0.5–2 HP
8.5A
190V –
265V
11A
0.5–2 HP 13.5A
0.5–3 HP 11.5A
11A
0.5–2 HP 13.5A
0.5–5 HP 18A
pump Owner's Manual and the National Electrical
Code for proper wire size.
Each carton contains:
•
PENTEK INTELLIDRIVE
• Pressure Transducer
• 10' Pressure Transducer Cable
• Quick Start Guide
• Owner's Manual
Enclosure
PENTEK INTELLIDRIVE Model Number Structure
Type
PIDXX
Product Family
PID - PENTEK INTELLIDRIVE
NEMA 3R
outdoor
HP Range
10 = up to 1.0 HP
20 = up to 2.0 HP
30 = up to 3.0 HP
50 = up to 5.0 HP
The PID10 will operate a 1-Phase 2-Wire, 1-Phase
3-Wire, and 3-Phase motor up to 1HP.
The PID20 will operate a 1-Phase 2-Wire up to 1.5HP
and a 1-Phase 3-Wire or 3-Phase motor up to 2HP.
The PID30 will operate a 1-Phase 2-Wire up to 1.5HP,
1-Phase 3-Wire up to 2HP or 3-Phase motor up to 3HP.
The PID50 will operate a 1-Phase 2-Wire up to 1.5HP,
1-Phase 3-Wire up to 2HP, or 3-Phase motor up to 5HP.
Variable Frequency Drive
4