DeLOCK 89220 Manual Del Usuario página 3

English
5. Use a screw to attach the card to the housing.
6. Reattach the housing, and connect the power cord to the AC adapter.
7. Switch on your computer.
Driver Installation
Windows Vista/7/8
1. After installation of the device, and after start of Windows the Hardware
wizard appears.
2. The driver won't be found automatically.
3. Put the driver CD in the CD ROM drive.
4. Open device manager, than right click on the error port and click "Update
Driver".
5. Choose "Search for drivers on the computer (extended)".
6. Click "Browse" and choose the path: "CD-ROM\PCIe\
OXPCIe952>Serial>x86" and click on "Next".
7. When driver is located, click "Continue installation".
8. Click on "Finish".
9. Restart your PC.
10. After restart you can start using the device immediately.
Windows XP/Server-2003
1. After installing the hardware and starting your computer the hardware wizard
will appear. Choose the option "No, not this time" and click "Next".
2. Put the driver CD in the CD ROM drive.
3. Choose the option "Install software from a list or from another source" and
click on "Next".
4. Click "Browse" and choose the path: "CD-ROM\PCIe\
OXPCIe952>Serial>x86" and click on "Next".
5. When driver is located, click "Continue installation".
6. Click on "Finish".
7. Restart your PC.
8. After restart you can start using the device immediately.
- -