Publicidad
Idiomas disponibles
Idiomas disponibles
9. Maintenance, cleaning and
storing
For best performance, always keep the saw
chain and the Nexxsaw in good order.
Remove the battery pack from the tool
before carrying out any adjustment, servic-
ing or maintenance.
• Clean the sprocket area with a brush or
compressed air. (See Fig. G).
• Use a cloth, a paintbrush or a brush to
remove dust and wood splinters. Always
keep the ventilation slots clean and free
from obstructions.
• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap. Do not use any cleaning or solvent
materials; these can attack the device's
plastic components. Make sure that no
water can get inside the electric power
tool.
• Do not let liquids of any kind enter the
Nexxsaw.
• From time to time check that all screws
are firmly secured.
• Store the Nexxsaw and the accessory
indoors in a dry place that is protected
from dust, dirt and extreme
temperatures.
• Store the Nexxsaw out of reach of chil-
dren and persons in need of supervision.
7063825-Nexxsaw-Ma-WF-2101-11.indb 11
7063825-Nexxsaw-Ma-WF-2101-11.indb 11
10. Technical data
Battery voltage: . . . . . . . . . . 18 V Li-Ion
No load speed: . . . . . . . . . . . 3200 min
No load chain speed: . . . . . . . . . 4.7 m/s
Total sword length: . . . . . . . . . .156 mm
Effective sword length: . . . . . . . . 110 mm
Max. cutting depth: . . . . . . . . . . 110 mm
Product weight without accessories:
. . . . . . . . . . . . . . . . . . . . . . . 1.5 kg
Sound pressure level L
pA
Multi-saw: . . . . . . . . . . . 58.77 dB(A)
Pruner (with extension pole): . 70.12 dB(A)
Uncertainty K
: . . . . . . . . . . . . 3 dB(A)
pA
Sound power level L
WA
Multi-saw: . . . . . . . . . . . 69.77 dB(A)
Pruner (with extension pole): .90.12 dB(A)
Uncertainty K
: . . . . . . . . . . . . 3 dB(A)
WA
Hand/arm vibration
Multi-saw: . . . . . . . . . . . . 0.956 m/s
Pruner (with extension pole)
Front: . . . . . . . . . . . . . . . 1.387 m/s
Rear: . . . . . . . . . . . . . . . 1.448 m/s
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
Vibration level
10.1
The declared vibration total value and the
declared noise emission values have been
measured in accordance with a standard
test method (EN 62841) and may be used
for comparing one tool with another. The
declared vibration total value may also be
used in a preliminary assessment of
exposure.
Warning!
The vibration and noise emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used, in particular,
what kind of work piece is machined.
It is necessary to identify safety measured
to protect the operator that are based on an
estimation of exposure in the actual condi-
tions of use (taking account of all parts of
the operating cycle such as the times when
the tool is switched off and when it is run-
ning idle in addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
English
-1
2
2
2
2
11
28-03-2022 15:51
28-03-2022 15:51
Publicidad
