Descargar Imprimir esta página

Makita DCM500 Manual De Instrucciones página 6

Cafetera inalámbrica
Ocultar thumbs Ver también para DCM500:

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1.
Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) appliance using battery.
.
Do not disassemble battery cartridge.
.
If operating time has become excessively shorter,
stop operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
.
If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
.
Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
.
Do not store the appliance and battery cartridge in
locations where the temperature may reach or exceed
50°C (122°F).
.
Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
8.
Be careful not to drop or strike battery.
.
Do not use a damaged battery.
10.
Follow your local regulations relating to disposal of
battery.
Tips for maintaining maximum battery life
1.
Charge the battery cartridge before completely
discharged.
Always stop appliance operation and charge the
battery cartridge when you notice less appliance
power.
.
Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
.
Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F). Let a hot battery cartridge
cool down before charging it.
.
Charge the battery cartridge once in every six months
if you do not use it for a long period of time.
Symbols
The following show the symbols used for the appliance.
Be sure that you understand their meaning before use.
Dangerous voltage
Pay attention

SPECIFICATIONS
Model
Power source
Water tank
capacity
Dimensions (l/w/h)
Weight
Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
Specifications and battery cartridge may differ from
country to country.
Weight, with battery cartridge, according to EPTA-
Procedure 01/00
OPERATION
PARTS IDENTIFICATION (Fig. C)
1.
Button
.
Red indicator
.
Battery cartridge
.
Star marking
.
Tank lid
.
Water tank
.
Filter
8.
Filter holder
.
Cup rest (for up to 3.5 in. (88 mm) tall cups or mugs)
10.
Power switch
11.
Bottom plate
1.
AC power socket
1.
DC power socket
1.
Measure (a level scoop of coffee: 0.2 oz. (6.5 g))
1.
Battery holder
1.
AC power cord
1.
"LIMIT" island
18.
Overflow opening
PREPARATION
When using the appliance first time, or after long period of
storage, perform the following steps:
1.
Remove all packing materials from the appliance.
.
Clean the appliance exterior and wash the filter and
filter holder (refer to the CLEANING section).
.
To clear any residue from the appliance, pour 150 ml
of fresh water into the water tank and brew (refer to
the BREWING section) without ground coffee in the
filter until the water tank is empty. Repeat the same
operation at least twice.
DCM500
AC (see the nameplate on the
appliance for the operating
voltage),
50-60 Hz
or
18 V DC (using a battery
cartridge BL180, BL180 or
BL1850)
150 ml
8-3/4" x 4-1/2" x 8-3/8"
(222 x 115 x 214 mm)
2.0 lbs (0.9 kg) without cord,
battery
3.7 lbs (1.7 kg) with battery

Publicidad

loading