Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
SCO10S, SCO10A, SCO10AXL, SCOA1SAX & SCOS1SAX SERIES CUTOFF TOOLS
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Cutoff tools can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Rotating grinding wheels can cause cuts and abrasions.
Keep hands and other body parts away from grinding wheels to prevent cutting or pinching. Wear protective clothing and gloves
to protect hands.
Contact with rotating grinding wheels can cause injury.
Cutoff tools present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do
not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could
become entangled with the tool.
Entanglements can cause injuries.
Grinding operations create dust.
Do not breathe grinding dust. Use approved mask.
Breathing grinding dust can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits. When drilling into walls, be aware that they may have hidden electric wires.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Grinding metals creates sparks that can ignite flammable materials and vapors.
Only grind metals if the area is free of combustible or explosive materials or vapors.
Explosions and fire can cause injury.
Overspeeding wheels can explode.
Check the speed rating of the accessory or the speed printed on the wheel. This speed must be greater than the nameplate
speed of the grinder and the actual speed of the grinder as measured with a tachometer. Do not exceed rated operating air
pressure.
Exploding wheels can cause injury or death.
Cutoff tools can generate unexpected movement.
Keep a firm grip on the tool at all times. Be sure your body position allows you to have control of the tool at all times. Make sure
your footing is secure. When possible, secure the work piece in a vice or with clamps.
Unexpected tool movement can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.
Taping or wiring the throttle valve in the "ON" position will prevent the tool from shutting off if the tool should jam or malfunction or if
anything unexpected happens.
Do not wire or tape down the "On-Off" valve of any power tool.
Tools that are prevented from shutting off can cause injury.
Poorly maintained and lubricated tools can fail unexpectedly.
Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See the tool's information
sheet to find out what other greases and oils to use. Do not drop the end of the hose on the floor where it will pick up dirt and
transport it into the tool. See information sheet for any additional maintenance requirements.
Unexpected tool failures can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
Form ZCE733A
All manuals and user guides at all-guides.com
INSTRUCTIONS & PARTS LIST FOR
SERIAL "B"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
Improperly used power tools can cause injury or death.
CUTOFF TOOL SAFETY
1
Original
Instructions
Form ZCE733A
Date 2014February19/D
Page 1 of 30
Date 2014February19/D
Publicidad
Manuales relacionados para SIOUX SCO10S
Resumen de contenidos para SIOUX SCO10S
- Página 1 Poorly maintained and lubricated tools can fail unexpectedly. Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See the tool’s information sheet to find out what other greases and oils to use. Do not drop the end of the hose on the floor where it will pick up dirt and transport it into the tool.
- Página 2 If an airline lubricator is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and run the tool for 10-20 seconds to distribute oil through the tool. For maximum performance and tool life, an air line lubricator, set to deliver 2 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is recommended.
- Página 3 All manuals and user guides at all-guides.com CHANGING WHEEL WARNING Disconnect tool from air supply before installing or removing wheel or making any adjustments 1. Remove flange. 2. Remove old wheel. 3. Install the new wheel onto the arbor. Make sure the wheel is flush against the face of the arbor and the hole in the wheel fits over the boss on the arbor.
- Página 4 Schlecht gewartete und geschmierte Werkzeuge können plötzlich versagen. Schmieren Sie das Werkzeug regelmäßig und reparieren Sie es, wenn notwendig. Benutzen Sie ausschließlich Sioux Motoröl Nr. 288. Auf dem Informationsblatt für das Werkzeug finden Sie weitere Informationen über zu verwendende Schmiermittel und Öle.
- Página 5 Sorgen Sie dafür, daß das Werkzeug zu einem vollständigen Halt gekommen ist, bevor Sie es beiseite legen. Schleifer, die nicht zu einem vollständigen Stop gekommen sind, bevor sie beiseite gelegt werden, können zu Verletzungen führen. Der Gebrauch von Zubehör, das nicht von Sioux Tools geliefert oder spezifiziert wurde, kann zu unvorhersehbaren Zwischenfällen führen.
- Página 6 Träufeln Sie 2 bis 4 Tropfen Druckluftmotoröl ein und lassen Sie das Werkzeug für 10 bis 20 Sekunden laufen, um das Öl im Werkzeug zu verteilen. Um eine maximale Leistung und Lebensdauer des Werkzeugs zu erzielen, wird ein Druckluftleitungs-Öler empfohlen, der so eingestellt ist, dass 2 Tropfen pro Minute geliefert werden. Empfohlen wird das SIOUX-Motoröl Nr. 288. AUSWECHSELN DER TRENNSCHEIBE 1.
- Página 7 Siempre mantenga la herramienta lubricada correctamente y en buen estado. Utilice solamente aceite para motores neumáticos de Sioux No. 288. Ver la hoja de información de la herramienta para saber tener información sobre otros aceites o grasas que puede utilizar. No deje caer el extremo de la manguera en el suelo donde puede ensuciarse y transportar la suciedad a la herramienta.
- Página 8 Asegúrese que la herramienta se ha detenido completamente antes de dejarla sobre una superficie. Los esmeriles que no están completamente detenidos cuando se colocan sobre una superficie pueden producir lesiones. El uso de cualquier accesorio con esta herramienta que no sea proporcionado o especificado por Sioux Tools puede tener un rendimiento impredecible.
- Página 9 Aplique entre 2 y 4 gotas de aceite para motores neumáticos y deje funcionar la herramienta durante 10-20 segundos para que el aceite se distribuya por toda la máquina. Se recomienda un lubricador de línea de aire que dispense 2 gotas/minuto para un rendimiento y vida útil máximos. Se recomienda el aceite para motores neumáticos SIOUX No. 288. REEMPLAZO DE LA RUEDA ADVERTENCIA Desconecte la herramienta de la fuente de aire antes de instalar o desmontar la muela o de hacer algún ajuste...
- Página 10 L’insufficiente manutenzione e lubrificazione degli strumenti può provocare guasti improvvisi. Mantenere sempre lo strumento adeguatamente lubrificato ed in buono stato. Utilizzare solo olio motore Sioux Air n. 288. Consultare il foglio informativo dell’utensile per determinare quali altri grassi ed oli utilizzare. Non lasciar cadere l’estremità...
- Página 11 Assicurarsi che lo strumento si sia arrestato completamente prima di riporlo. Molatrici non completamente arrestate prima di riporre lo strumento possono provocare lesioni. L’utilizzo, con questo strumento, di accessori non forniti o specificati da Sioux Tools può portare a risultati imprevedibili. Utilizzare solo accessori forniti o specificati da Sioux Tools.
- Página 12 Aggiungere 2-4 gocce di olio per motori ad aria e mettere in moto lo strumento per 10-20 secondi per distribuire l’olio nello strumento. Per migliorare al massimo il rendimento e la vita dello strumento, si raccomanda l’uso di un lubrificante della linea dell’aria, impostato su 2 gocce al minuto. Si raccomanda l’olio per motori ad aria SIOUX No. 288. SOSTITUZIONE DELLA MOLA AVVERTIMENTO Scollegare lo strumento dall’aria prima di installare o rimuovere la mola o effettuare qualsiasi regolazione.
- Página 13 Vous assurer de lubrifier l’outil comme il se doit et le maintenir en bon état de fonctionnement. Utiliser seulement l’huile de moteur pneumatique Sioux Air Motor Oil No. 288. Consulter la fiche technique de l’outil pour connaître les autres huiles et lubrifiants recommandés.
- Página 14 Une meule peut entraîner des blessures si elle n’est pas complètement arrêtée au moment d’être posée. L’utilisation d’accessoires non fournis ou recommandés par Sioux Tools peut entraîner un fonctionnement irrégulier. N’utiliser que les accessoires fournis ou recommandés par Sioux Tools.
- Página 15 Pour obtenir les performances maximales et une durée de vie prolongée, l’utilisation d’un dispositif de lubrification de conduite d’air, réglé pour distribuer 2 gouttes par minute, est conseillée. L’huile pour moteurs pneumatiques SIOUX No. 288 est recommandée. REMPLACEMENT DE LA MEULE AVERTISSEMENT Débrancher l’outil de la ligne d’apport d’air avant d’installer ou de démonter une meule ou d’effectuer tout réglage.
- Página 16 Slecht onderhouden en slecht geölied gereedschap kan leiden tot plotselinge storingen. Zorg steeds dat de boor goed geölied en in goede conditie is. Gebruik alleen Sioux Air Motor Oil No. 288. Zie specificaties over het gebruik van andere oliën en vetten. Laat het uiteinde van de buis niet op de grond vallen, zodat stof en verontreinigende deeltjes de boor niet kunnen bereiken.
- Página 17 Slijpmachines die niet volledig tot stilstand zijn gekomen als ze worden weggezet, kunnen letsel veroorzaken. Het gebruik van een niet door Sioux Tools geleverd of gespecificeerd onderdeel of accessoire kan onverwachte gevolgen hebben. Gebruik alleen door Sioux Tools geleverde of gespecificeerde onderdelen en accessoires.
- Página 18 Voeg 2-4 druppels luchtmotorolie toe en laat het gereedschap gedurende 10-20 seconden draaien om de olie door het gereedschap te verspreiden. Voor optimale werking en gebruiksduur van het gereedschap is een smeerinrichting aanbevolen die is ingesteld op 2 druppels per minuut. SIOUX nr. 288 luchtmotorolie is aanbevolen.
- Página 19 Illa skötta och dåligt smorda verktyg kan oförutsett sluta att fungera. Håll alltid verktyget väl smort och i god funktion. Använd enbart Sioux Air Motor Oil Nr. 288. Uppgifter om andra smörjämnen och oljor som ska användas finns i informationsbladet för verktyget. Släpp inte ned änden på slangen på golvet där den kan plocka upp smuts som kan komma in i verktyget.
- Página 20 Slipmaskiner som inte har stannat helt innan de sätts åt sidan kan förorsaka kroppsskada. Om du använder tillbehör med detta verktyg som ej tillhandahålls eller specificeras av Sioux Tools kan dessa fungera oberäkneligt. Använd endast tillbehör som tillhandahålls eller specificeras av Sioux Tools.
- Página 21 All manuals and user guides at all-guides.com BYTA SLIPSKIVA VARNING Koppla loss verktyget från lufttillförseln före installation eller avlägsnande av slipskivan och före eventuella justeringar 1. Avlägsna flänsen. 2. Avlägsna den gamla slipskivan. 3. Installera den nya slipskivan på dornen. Se till att slipskivan sitter plant med dornens framkant och att hålet i slipskivan passar över navet på dornen.
- Página 22 All manuals and user guides at all-guides.com PARTS LIST FOR SCO10S SERIES CUTOFF TOOLS SERIAL “B” SCO10S253 SCO10S184 SCO10S204 *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Fig. Part Description Description 74059 3" cutoff wheel Guard...
- Página 23 All manuals and user guides at all-guides.com PARTS LIST FOR SCO10A106 SERIES CUTOFF TOOLS SERIAL “B” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Fig. Part Description Description 77035 6” Cutoff Guard 14290 O-Ring 77027 Wheel Retainer 74013 Regulator 77026 Wheel Arbor...
- Página 24 All manuals and user guides at all-guides.com PARTS LIST FOR SCO10A125 SERIES CUTOFF TOOLS SERIAL “B” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Fig. Part Description Description 77034 5” Cutoff Guard 74018 Torr Pin, 3/16 X 7/8 77027 Wheel Retainer 67793 O-Ring 77026 Wheel Arbor...
- Página 25 All manuals and user guides at all-guides.com PARTS LIST FOR SCO10AXL SERIES CUTOFF TOOLS SERIAL “B” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Fig. Part Description Description 77019 Type 1 Wheel Retainer 14290 O-Ring 77511 Output SpindleType 1 Low Profile 74013 Regulator...
- Página 26 All manuals and user guides at all-guides.com PARTS LIST FOR SCOS1SAX & SCOA1SAX SERIES CUTOFF TOOLS SERIAL “B” *Order Quantity As Required FURNISH CATALOG, SERIAL, AND MODEL NUMBER WHEN ORDERING PARTS Fig. Part Fig. Part Description Description 77019 Type 1 Wheel Retainer 77523 Steel Housing (SCOS1AX series) 77511 Output SpindleType 1 Low Profile 77524 Aluminum Housing (SCOA1AX series)
- Página 27 All manuals and user guides at all-guides.com DECLARATION OF CONFORMITY KONFORMITÄTSERKLÄRUNG DECLARACIÓN DE CONFORMIDAD Manufacturer: Hersteller: Fabricante: Sioux Tools Sioux Tools Sioux Tools 250 Snap-on Drive 250 Snap-on Drive 250 Snap-on Drive P.O. Box 1596 P.O. Box 1596 P.O. Box 1596...
- Página 28 All manuals and user guides at all-guides.com DICHIARAZIONE DI CONFORMITÀ DÉCLARATION DE CONFORMITÉ VERKLARING VAN OVEREENSTEMMING Fabbricante: Fabricant : Fabrikant: Sioux Tools Sioux Tools Sioux Tools 250 Snap-on Drive 250 Snap-on Drive 250 Snap-on Drive P.O. Box 1596 P.O. Box 1596 P.O.
- Página 29 All manuals and user guides at all-guides.com FÖRSÄKRAN OM ÖVERENSSTÄMMELSE Tillverkare: Sioux Tools 250 Snap-on Drive P.O. Box 1596 Murphy, NC, 28906, USA Produkt: Kapverktyg Modellnr.: SCO10 Serienummer: MWCA Undertecknad deklarerar härmed, på ovan angivna tillverkares och produkters vägnar som denna deklaration är förknippad med, att de följer bestämmelserna i:...
- Página 30 All manuals and user guides at all-guides.com WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw.
- Página 31 All manuals and user guides at all-guides.com ZCE733A_RevD Where Used SCO10A106 6IN ANGLE CUT-OFF TOOL SCO10A125 5IN ANGLE CUT-OFF TOOL SCO10AXL124 SIG LP CO TOOL 12K RPM 4 INCH SCO10S184F 4" CUTOFF TOOL 18K RPM SCO10S184R 4" CUTOFF TOOL 18K RPM SCO10S204F 4IN INLINE CUT-OFF TOOL FRONT SCO10S204R...