Publicidad
Idiomas disponibles
Idiomas disponibles
Addressing the device
Each device occupies 3 channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DIP switches
as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Occupation of the DIP-switches:
Controlling:
After having addressed all LED MAT-64 DMX, you may now start operating these via your lighting controller.
DMX-protocol
Channel 1
Program
0
Leds off
1-10
Program 1
11-20
Program 2
21-30
Program 3
31-40
Program 4
41-50
Program 5
51-60
Program 6
61-70
Program 7
71-80
Program 8
81-90
Program 9
91-100
Program 10
101-110
Program 11
111-120
Program 12
121-130
Program 13
131-140
Program 14
141-150
Program 15
151-160
Program 16
161-170
Program 17
171-180
Program 18
181-190
Program 19
191-200
Program 20
21/44
51918550_V_1_0.DOC
Publicidad
