LG SDWB24 Serie Manual Del Propietário página 33

en-us_main.book.book Page 33 Wednesday, January 25, 2023 8:53 AM
NOTE
• To verify the Wi-Fi connection, check that the Wi-
Fi LED on the control panel is lit.
• The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact
your Internet service provider or refer to your
wireless router manual.
• LG ThinQ is not responsible for any network
connection problems or any faults, malfunctions,
or errors caused by network connection.
• The surrounding wireless environment can
make the wireless network service run slowly.
• If the distance between the appliance and the
wireless router is too far, the signal becomes
weak. It may take a long time to connect or fail
to install the application.
• If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
• The network connection may not work properly
depending on the Internet service provider.
• The Wi-Fi may not connect or the connection
may be interrupted because of the home
network environment.
• If the appliance cannot be connected due to
problems with the wireless signal transmission,
unplug the appliance and wait about a minute
before trying again.
• If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to
WEP, network setup may fail. Change the
security protocol (WPA2 is recommended), and
connect the product again.
Using the Appliance Remotely
Remote Start
Use a smartphone to control the appliance
remotely or check to see how much time is left in
the cycle.
SMART FUNCTIONS
Using Remote Start
1
Load the dishes into the dishwasher.
2
Press the Power button.
3
Make sure that the Wi-Fi is connected.
4
Press the Remote Start button and close the
dishwasher door to enable the Remote Start
function.
5
Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
• Once the Remote Start mode is enabled, you
can start a cycle from the LG ThinQ application,
but the cycle and option keys on the appliance
are deactivated. To activate the keys, disable
Remote Start.
• The door must be closed in order to activate the
Remote Start mode.
Disabling Remote Start
While Remote Start is activated, open the
dishwasher door or press the Remote Start
button with the door closed.
Radio Equipment Specifications
Frequency
Type
Range
Wi-Fi 2412 MHz - 2462 MHz
Bluetooth 2402 MHz - 2480 MHz
FCC Notice
The following notice covers the transmitter
modulecontained in this product.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
33
Output
Power
< 30 dBm