Descargar Imprimir esta página

Publicidad

Enlaces rápidos

Model #
629Wc
Keepsake Side
Table
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload drawer or shelf on this unit.
Unload items before you move this unit.
Handle the glass plates with care.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions and Finishing Hints.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
10/14

Publicidad

loading

Resumen de contenidos para Whittier Wood 629Wc

  • Página 1 For a replacement portion of this page), the part letter, production code, part, directly contact Whittier Wood Products customer quantity needed, reason for replacement and your full service department by phone, fax, mail or email.
  • Página 2 629Wc Keepsake Side Table — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. Left Side Assembly...
  • Página 3 2. Apply a thin film of glue in the dowel holes of the Right Side Assembly (Cb) and attach to Sleepers (D & E). Gently tap with a mallet and quickly wipe away any excess glue. Insert #8x1-1/4" Pan Head Screw (Nb) through each Sleeper and into side assembly. See Figure 2. Page 3 — 629Wc — 10/14...
  • Página 4 4. Place Top (Ab) upside-down on a clean, protected surface. Align and insert Leg/shelf assembly into dowel holes in the Top (Ab). Gently tap into place with a mallet. Insert #8x 1-1/4" Pan Head Screws (Nb) through each side assembly and Sleeper (E) into Top (Ab). See Figure 4. Page 4 — 629Wc — 10/14...
  • Página 5 Using a damp towel, quickly wipe up any excess glue. Insert #8x1-1/4" Pan Head Screws (Nb) through drawer sides and into drawer front. See Figure 6. Fig. 7 7. Slide Drawer Bottom (L) into grooves in drawer assembly. Page 5 — 629Wc — 10/14...
  • Página 6 Machine Screw (T). See Figure 8a. Insert drawer into unit. Fragile Fig. 9 Place the Tempered Glass Plate (M) into top of unit. See Figure 9. To remove the glass, use the Suction Cup (S) provided. Page 6 — 629Wc — 10/14...
  • Página 7 Whittier Wood Products por teléfono, fax, dirección y numero de teléfono. correo postal o electrónico.
  • Página 8 (E) en el marco superior de la mesita. Vea la Figura 9. Para retirar el vidrio, utilice la ventosa (Ab). Vea la Figura 4. (S) provista. Page 2 SP — 629Wc — 10/14...
  • Página 9 à la pièce, le code de production, la quantité remplacement, merci de contacter directement le service à nécessaire, le motif du remplacement, votre nom complet, la clientèle de Whittier Wood Products par téléphone, adresse et numéro de téléphone. télécopieur, adresse postale ou courriel.
  • Página 10 Voir la Figure 9. Pour retirer le verre, utilisez la ventouse (S) cylindrique no. 8x1-1/4 po (Nb) dans chaque assemblage latéral, fournie. puis la traverse (E) dans le dessus (Ab). Voir la Figure 4. Page 2 FR — 629Wc — 10/14...
  • Página 11 Whittier Finishing Hints instructions call for a slow drying glue. Carefully read the Checklist of materials label and instructions of the glue manufacturer. Your unit □ □ □ Rubber gloves Tack cloth #220 & #320 may not need glue. □ □...
  • Página 12 Whittier Finishing Hints apply additional coats. Lightly sand and wipe surface Preparing the surface with a lint-free rag or tack cloth between coats. 1. Sand each piece with #220 grit sandpaper. Sand with the grain of the wood on flat surfaces and opposite the 4.
  • Página 13 Consejos de Whittier para terminaciones Consejos de pegado Lista de control de materiales Estos son algunos consejos generales. Consulte las □ □ □ Guantes de Paño de Papel de lija instrucciones de ensamblaje para obtener información detallada hule adherencia No. 220 y No. sobre cómo pegar el producto específico que utilice.
  • Página 14 Consejos de Whittier para terminaciones Consejos para las terminaciones Aplicación de la capa de acabado Utilice productos de la misma marca para garantizar la Siempre debe leer y seguir las instrucciones de la etiqueta. compatibilidad. No se recomienda mezclar terminaciones a Mezcle suavemente el preparado para la capa de acabado, base de solventes y a base de agua.
  • Página 15 Conseils de finition de Whittier Conseils en matière de collage Liste de vérification des matériaux Cette section contient des conseils d'ordre général. Veuillez vous □ □ □ Gants en Chiffon résiné Papier de reporter aux instructions d'assemblage pour des renseignements □...
  • Página 16 Conseils de finition de Whittier enduits de finition à base de solvant et d'eau. Lisez et suivez Lisez et suivez les instructions figurant sur l'étiquette. Mélangez doucement l'enduit de finition; n'agitez pas. Le fait toujours les instructions figurant sur le produit. d'agiter peut entraîner la formation de bulles qui seront par la L'aulne est un bois dur et poreux dont l'aspect est souvent suite difficiles à...