Publicidad
Idiomas disponibles
Idiomas disponibles
LS 14, 16, Cart
Overview
To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.
Design and function
The Atlas Copco LS 14 and LS 16 hydraulic cut-off
saws are powerful, light and compact machines
designed for working together with Atlas Copco
hydraulic power packs.
The cut-off saws are designed for cutting through
concrete, asphalt and steel with cutting blades for
both dry and wet cutting. They can be used with both
diamond blades and with abrasive discs. A dust
collector can be connected to the blade guard for
operation in areas where the use of water is not
possible. No other use is permitted.
A separate water kit with pressure tank is available
(see the spare parts list).
The simple hydraulic design with direct drive, reduces
maintenance and provides consistent speed and
torque.
The Atlas Copco LS 14 and LS 16 cut-off saws are
delivered with 2 m ⅜" tail-hoses with ½" 'Flat-Face'
quick-release couplings.
Main parts
Trigger
A.
B.
Valve block
Frame
C.
Front handle
D.
E.
Guard
Hydraulic motor
F.
Hydraulic hose
G.
© 2010 Atlas Copco Construction Tools AB | No. 3392 5042 90b | 2010-01-01
Original instructions
Safety and operating instructions
Water valve
H.
I.
Cutting blade
Quick release couplings
J.
Cart for the cut-off saw
The Atlas Copco LSC cart for the cut-off saw is
recommended for precise and clean cutting jobs on
roads, pavements and floors.
The use of the cart gives a better working posture,
and the cutting depth can be adjusted by means of
an arm at the front of the cart. The cart is equipped
with a water kit. The cart is not standard equipment.
Assembling the cut-off saw in to the cart:
Untighten the screws (1).
●
●
Set the body of the cut-off saw between the
brackets (2).
Tighten the screws (1).
●
Set the lever holder (3) over the safety trigger and
●
tighten it.
●
Set the cable link over the trigger (4) and tighten
it.
Connect the water hose of the tank to the nipple
●
of the cut of saw and switch ON the water lever
of the tank.
The depth of cutting can be adjusted with the
●
screw (5).
Disassembling the cut-off saw from the cart:
13
Publicidad
