Publicidad
ENGLISH
1. Product Guidance
1) Introduction
VORSCH USB-C HUB is designed specifically designed for MacBook series products like MacBook Pro and
MacBook Air. It has been compatible with Thunderbolt-3 protocol including all functions, be responsible for USB
3.0 data transmission, high-efficiency power charging, HDMI signal transmission, and transformation. It is an
advanced multi-functional USB-C HUB.
2) Operational Requirements
A) The temperature of equipment: Lower than 56°C (Tested: While fully loaded with over 20devices+ &
6charging devices at the same time)
*NOTE: For more stability and balance of transmission, we recommend connecting power while using USB or
HDMI if possible.
*Please ensure that if your external equipment needs extra power/charging before using.
*Slightly heating is normal, please contact us if overheat.
B) Compatibility: MacBook Pro or MacBook Air including M1 & Intel series chips,
2021/2020/2019/2018/2017/2016 for 13", 15", and 16".
*Note: More equipment will be updated.
3) Parameters
PARAMETERS
Refe
Port
rs to
USB-C PD with
①
Thunderbolt 3
USB-C
②
*No charge for Mac,
Reverse charge only.
③
SD Card Port
③
TF Card (Micro SD)
USB 3.0
④
*No charge for Mac,
Reverse charge only.
⑤
HDMI 4K@30Hz
*The maximum
*AC power charger(100W) would split the power to different devices, the highest threshold is 100W.
NOTE
*Please remember to eject the equipment before remove it from Hub.
@VORSCH
Speed
· AC Power Charging: 100W
Maximum (in total)
· Up to 40Gbps;
· USB-C to USB-C Thunderbolt cable
supports 5K@60Hz with 5K Screen;
up to 5Gbps (Average 104-
120+mbps)
(Theoretical stabilize at 50-120mb/s)
4K@30Hz
*To reach 5K@60Hz, please use
USB-C to USB-C Thunderbolt cable
for port
①
capacityof the external device that can be read is
Supports
Note
*AC power charger needs to be
· USB 3.0 specification;
supported for
· PD;
*5K@60Hz needs 5K screen monitor
· Thunderbolt 3;
and 5K USBC Thunderbolt cable.
*To reach 3.0 specification speed
needs External Equipment support 3.0
· USB 3.0 specification;
*When
· Backward support USB
of data transmission
2.0 specification;
2.0(480mbps,20-30mb/s)
*To reach 3.0 specification speed
needs External Equipment support 3.0
*To reach 4K@30Hz, please ensure
4K@30Hz
your HDMI supports 4K@30Hz or
higher
2TB
100W(in total)
both of SD and TF
on, speed
will down to
2
2
Publicidad
