Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE - MAINTENANCE - SPARE PARTS
Concrete mixer BI 135
GB
Drum capacity
Maximum mixing capacity
Single phase motor 230V/50Hz
Used power when starting
Length
Width
Height
Wheels
Weight
4
3
5
6
2
7
1
Concrete
Mortar
- Set the drum at the selected angle (on one side or
the other). The angle the nearest to the horizontal
will provide a better mixing of the agregates, but
will reduce the capacity.
- Put some water into the drum, spread the right
quantity of cement over the agregates (gravel or
sand), and load the drum. Add some water while
loading.
- The enclosed chart will guide you in the
proportions of your works. The quantity of water is
given as an indication only ; it will depend on the
degree of humidity of the agregates.These
proportions are given as information only, and
cannot
engage
the
TECHNICAL DATA
PRODUCTION OF CONCRETE AND MORTARS
The tilting disk has 7 different notches
Position
1
Opening of the drum upward.
Position
2
Mixing on lefthand side.
Position
3
Emptying on left-hand side and storing.
Position
4
Opening of the drum downward.
Position
5
Emptying on right-hand side and storing.
Position
6 et 7
Mixing on right-hand side.
Batch for usual concrete and mortar
(with one 25 kg cementbag).
Sand
30 L
60 L
responsability
of
the
11
L
L
W
mm
mm
mm
ø mm
kg
Gravel
60 L
-
manufacturer.
- 1 shovel = 4 litres approx. , 1 wheelbarrow = 60.
- Let the drum turn during one minute or so, in
order to obtain a good mix. Do not continue the
mixing beyond two minutes otherwise you will
centrifugate the materials.
The above sizes are for your information and cannot
engage the responsibility of the manufacturer.
BI 135
130
110
600
1170
710
1400
200
54
Water
around
13 L
around
13 L
Publicidad
