Descargar Imprimir esta página

Profile PLI-920 Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
SOLAR LIGHT KIT
PLI-920/PLI-921
We thank you for the purchase of this Profile
product. Note: It is important that you read this
manual before using the product Then keep this
manual in a safe place.
This kit consists of:
For PLI-921:
1.
1 x 5m cable
2.
1 x solar panel 14.5cm x 11.5cm
3.
1 light with 8 LEDs
For PLI-920:
1.
1 x 5m cable
2.
1 solar panel 14.5cm x 11.5cm
3.
2 lights each with 12 LEDs
Installation
1.
Fig 1: Fasten the light(s) and the solar panel
using the screws supplied in the desired
place.
CAUTION! Place the solar panel in a place
where it can receive as much direct sunlight
as possible. This will lengthen the lighting
time of your light(s).
2.
Fig 2 & Fig 3: Connect the cables supplied as
shown.
3.
Fig 4: Switch the light(s) into the ON position.
Use
The light(s) have been specially designed for
outside use. They can however be used
indoors as long as the solar panel is outside.
The performance of this kit depends on the
strength of the sun and the number of hours
of sunlight a day. The panel can charge more
during a sunny day than during a cloudy day.
Maintenance
To maintain the life of the lights it is best to
store the kit indoors during extremely poor
weather conditions.
Clean the light(s) and the panel using a soft,
dry cloth. Never use chemical or abrasive
cleaning products.
Regularly clean the solar panel. Dirt and dust
will reduce the performance of the panel.
Battery replacement
To ensure the best performance it is best to
replace the batteries every 12 months (fig. 5):
1.
Remove the battery compartment cover using
a screwdriver
2.
Fit new rechargeable batteries
3.
Replace the cover and screw it tight again.
Specifications
Ideal for illuminating places where there is no
power supply. E.g. Garden shed, terrace
No energy consumption
PLI-920: 2 LED lights: 2 x 12LEDs * 5.5m
PLI-921: 1 LED light: 8 LEDs * 5.5 lumen
Solar panel: monocrystal 1.25W
PLI-920: Cable 2 x 5m
PLI-921: cable 1 x 5m
Lighting time for light with fully charged
batteries: 5-6 hours
3 x 1.5V AA rechargeable battery included
Guarantee conditions
The guarantee period for
PLI-920/PLI-921
and commences on the date of purchase. During this guarantee
period Eltra nv will repair any defects attributable to material or
production faults. ELTRA NV may choose to either repair or
replace a defective appliance.
ELTRA NV is not obliged to repair or replace appliances if they
have become defective as a result of damage, inappropriate
use, or modifications or adaptations made after the purchase
date.
Take any defective appliance together with the original receipt
back to the shop where the appliance was sold. Always add a
note with a description of the problem.
Damage
ELTRA NV can under no circumstances whatsoever be held
responsible for damage of whatever nature if the appliance was
not correctly installed according to the specified installation
instructions, nor for damage as a result of unforeseen
circumstances such as natural disasters, lightening strike, etc.
All such resulting costs are consequently at the expense of the
buyer and are not covered by the guarantee conditions.
www.profile.eu
Eltra nv, Pachtgoedstraat 2, 9140 Temse, BELGIUM
Eltra DIYeuronet, Frontstraat 14, 5405 AM Uden,
THE NETHERLANDS
EN - 1
amounts to 2 years

Publicidad

loading

Este manual también es adecuado para:

Pli-921