Descargar Imprimir esta página

Octane Seating OCT-BSAR200 Manual Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

1.
Read these instructions and keep them for future reference.
2.
Carefully follow instructions and warnings.
3.
To reduce the risk of electric shock, do not remove cover.
4.
To reduce the risk of fire and shock do not use this device near water, expose to rain
or moisture.
5.
Clean amplifier housing only with a dry cloth.
6.
Do not block any of the ventilation openings.
7.
Do not install near any heat sources (including amplifiers) that produce heat.
8.
Do not remove power cable grounding plug.
9.
Prevent the power cable from being stepped on or pinched.
10.
The unit should be connected to an earth grounded AC electrical socket.
11.
The unit should be operated in a well-ventilated area.
12.
Unplug this unit during lightning storms or if not in use for an extended period of time. This
device can be plugged into a surge protector or power strip but should NOT be plugged into a
UPS (uninterruptable power supply).
13.
Refer all servicing to qualified personnel.
14.
No user serviceable parts inside.
15.
Minimum clearance is 2 inches.
FCC STATEMENT
1.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
a.
This device may not cause harmful interference.
b.
This device must accept any interference received, including interference that may cause
undesired operation.
2.
FCC Radiation Exposure Statement: Mobile device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1

Publicidad

loading

Productos relacionados para Octane Seating OCT-BSAR200