CL Series
CL Series
CL1699 SERIES
CL3299 SERIES
1856
UNI EN 81/70
Barriere ottiche multiraggio per protezione porte ascensori e piattaforme elevatrici.
• Altissima immunità alla luce e ai disturbi elettromagnetici, per un l ivello di protezione superiore •
Possibilità di installazione statica o dinamica, su porte con apertura centrale o telescopica • Area protetta
da 25 a 1800 mm secondo normativa • Esclusivo trafilato in alluminio dimensioni standard 10 x 33 x
1856 mm ( altre lunghezze, dimensioni o personalizzazioni a richiesta) • La barriera viene fornita completa
di alimentatore uscita a relè 10A • I cavi della lunghezza di 3 mt, sono intercambiabili fra RX e TX e sono
dotati di connettori di collegamento alle barriere e all' alimentatore per consentire rapidità di installazione
e impossibilità di errori • Funzione anti-vandalica: l'ostruzione prolungata di un raggio oltre 45 sec è
seguita dal ripristino, con l'esclusione del raggio rimasto ostruito.
Multi-beam optic barriers series to protect lift doors and lifting platforms.
• High immunity against the light and electromagnetic interferences for a higher protection level •
Suitable either for static or dynamic installation on both central opening or telescopic doors • Detected
area: from 25 up to 1800 mm according to the norms in force • Exclusive aluminium profile10x33x1856
standard sized (other lengths and sizes or custom made releases on request) • Safety curtain supplied
with 10A output control box unit • Interchangeable 3 m RX and TX cables equipped with connectors to
both detectors and control box unit for a faster and errorless installation • Timeout function: the extended
obstruction of a diode for more than 45 seconds has as consequence the reset of the safety curtain and
the exclusion of the dimmed diode.
84 raggi incrociati con test automatico
di verifica del funzionamento.
84 criss cross beams with automatic test
to check the operation.
154 raggi incrociati con test automatico
di verifica del funzionamento.
154 criss cross beams with automatic test
to check the operation.