Descargar Imprimir esta página

Britec AIR FRESH 10 Instrucciones De Uso página 35

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE AND CLEANING
Cleaning cover grille
To ensure that the air cooler operates effi ciently, you should clean the cover
grille after each week of operation.
1. Before cleaning the appliance, switch it off , then wait a few minutes, and
then unplug it to disconnect the appliance from the mains power supply.
2. Use a screwdriver to remove the 2 locking screws on the cover grille and
remove the cover grille from the device.
3. Use a vacuum cleaner to remove the dust accumulated in the cover grille.
4. If the cover grille is very dirty, immerse it in warm water and rinse it several
times – but the water temperature must not exceed 40°C.
5. Before putting the cover grille back into the appliance, allow it to dry out
well after washing.
6. Replace the cover grille and secure it with the locking screws.
Note: Never use the appliance without the cover grille.
36

Publicidad

loading

Productos relacionados para Britec AIR FRESH 10