Descargar Imprimir esta página

DAY 37225 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
Outdoor mechanical timer
INTRODUCTION
To get the most out of your new product, please read this manual before use. Please also
save the manual in case you need to refer to it at a later date.
SPECIFICATIONS
Power rating: 230 V~, 50 Hz, 16(2) A,
max. 3680 W
Protection class: IP44, for outdoor use.
Time interval: +/- 15 minutes
Protection class: IP44
With plug protection to 220 V/16A
Class I: Must be plugged into an
earthed socket.
PRECAUTIONS
Use outdoor rubber plugs only. The
timer must be fitted vertically to
maintain its protection class: IP44.
For safety reasons, always switch the
appliance off before connecting it.
Always make sure that the appliance
plug is fully inserted into the timer
socket.
Do NOT exceed the voltage and fre-
quency values specified in the
"Specifications".
If you need to clean the timer, remove
it from the power socket and wipe it
with a dry cloth. Do not immerse in
water or any other liquid.
Do not connect different timers
together.
Unplug the timer to switch it off.
SETTING THE ON/OFF PERIODS
This timer can be set for up to 48 on/off
commands per day.
On period: Push the pins down.
Off period: Push the pins up.
Each pin corresponds to 15 minutes: 4
pins = 1 hour.
SETTING THE TIME
Turn the clock dial until the triangular
pointer is pointing to the current time.
1. Pins
2. Triangular pointer
10
1
2

Publicidad

loading