Stryker 0678001500 Manual De Operación página 9

2. About Your Product
2.1 Product Description
The Near-Source Converter Box (NSCB) is a device intended to convert
the video signal from a DVI-D, RGB-HV, SDI, S-Video/Composite Video
format into a digital DVI video format.
2.2 Intended Use
The Near Source Converter is intended to be used for converting video,
from mobile devices rolled into the OR into a common video format
requiring one wall plate instead of many. The Near Source Converter
will perform the following functions. The converter will be installed
on the mobile device, accepting common video formats including
SDI, S-Video, VGA, and DVI and convert them to a single video format,
HDbaseT. The video signal is then sent via a CAT6 cable to a passive
wall plate with a single connector, and finally into the SPI2/SPI3/
SPI3Lite with an HDbaseT to DVI converter.
2.3 Indications for Use
The Near Source Converter is indicated to be used with various
auxiliary video outputs in operating rooms where the need for
secondary video displays exists. The primary users are hospital staff
including doctors and nurses.
2.4 Intended Patient Population
The Near Source Converter is intended to be used for any patient
receiving a surgical procedure requiring mobile device images on a
secondary display.
All manuals and user guides at all-guides.com
5