Probuilder 56149 Manual De Instrucciones página 27

Screwdriver, Battery 3.6v Li-Ion
INTRODUCTION
To get the most out of your new product, please read this manual before use. Please
also save the manual in case you need to refer to it at a later date.
TECHNICAL DATA
Battery (built-in):
Charging time:
Speed:
Torque settings:
Max. torque:
Charger: 100-240 V ~ 50/60 Hz, 0.2 A
With LED work light and 60° swivelling
handle
Supplied accessories: Charger, 20 pcs. S2
steel 25 mm bits and 1 bit holder
This product is double insulated
and comes under protection class
II.
SPECIAL SAFETY DIRECTIONS
Only charge the battery at room
temperature (max. 40 °C).
Never charge the battery if the
screwdriver, adapter or cord is damaged.
Check that the ventilation slots on the
screwdriver are not blocked.
Do not use damaged or worn screw bits
and always select the correct type of bit
for the job.
Secure small items in a vice or similar.
Never hold the item in your hand!
Check for concealed power cables, pipes,
etc. in the items you are going to screw
into to avoid hitting them. Only touch the
plastic parts of the screwdriver during use
on masonry.
Make sure that the screw does not
damage any objects under or behind the
item, e.g. when screwing into walls.
Make sure the screwdriver has stopped
completely before changing direction.
Do not press the on/off button if the
battery is fully discharged, as this may
damage it.
GENERAL POWER TOOL SAFETY
WARNINGS
3.6 V 1.3 Ah Li-ion
3-5 hours Read all safety warnings and all
230 rpm instructions. Failure to follow the
6+1 warnings and instructions may result in
electric shock, fire and/or serious injury.
4.5 Nm
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
27
GB