EN
Problem
Possible cause/solution
Background noises
•
In a quiet environment, surrounding the Parent Unit, decrease the volume on your Parent
Unit to level 3 and below.
•
In a loud environment, surrounding the Parent Unit, increase the volume to the maximum
level.
Picture is black and white
•
Automatic Night vision mode may be on. Increase lighting around the camera to force
monitor out of night vision mode.
Lines/marks across the screen
•
Camera Lens is dirty. Follow the Maintenance procedure.
•
Confirm that power adapters are properly connected.
•
Reset the Parent unit by pressing the RESET button (17), located at the back of the Parent Unit,
under the stand.
The rechargeable battery will not charge,
•
The power adapter may not be properly connected.
or no charge light shows
•
Switch to another wall outlet.
•
Switch between the Baby Unit and Parent Unit power adapters.
IMPORTANT: If the above troubleshooting guide did not help you solve your problem, please contact our customer service via:
Email -
support@babysensemonitors.com
Toll Free Number –
Telephone Number -
20
(833) 568-2229 (USA ONLY)
(972) 3-9566604 (INTERNATIONAL)
7. Specifications
Product Model
Frequency
Type of Modulation
Data Rate
Channel Bandwidth
Transmission Range
Input Voltage
Power Adapter
LCD Screen
Rechargeable battery
(pre-installed in Parent Unit)
Operating time with battery fully charged (Parent Unit)
* It takes about 8 hours to fully charge the battery.
Transmitting Power
Image sensor type
IR LED Type
Operation Environment
•
HD S2
•
2.4GHz FHSS
•
GFSK
•
4 Mbps
•
3.5 MHz
•
Up to 960 feet / 350 meters (open space – no obstructions)
•
5V, 1.0 A
•
Input: 100-240VAC 50 / 60Hz, 200mA Max;
•
Output: 5V, 1.0A;
•
5.0" TFT LCD (1280*720 pixels)
•
Model: YB905560
•
3.7V, 4000 mAh
•
Approx. up to 20 hours (VOX on)
•
Approx. up to 12 hours (Monitor on)
•
18dBm M
•
1/4" Color CMOS
•
940nm
•
Indoor use only; Temperature: 32-104°F / 0-40°C
•
Humidity: 5% to 90% rh. (relative humidity)
EN
21