Publicidad
Idiomas disponibles
Idiomas disponibles
AIR BLOWER PUMP
INSTRUCTION
Characteristics of the product:
220-240V at 50Hz/60Hz or 110-120V at 60Hz.
Insulation class F.
Thermal protector VDE or UL approved .
Noise: Air blower with nozzle
Fuse inside the motor.
Parts and materials:
Pump casing: high temperature resistant
reinforced plastic.
Air switch:15A,250V(Optional).
High quality carbon brush.
Use and installation:
The number of nozzles installed must be higher
than the minimum number indicated.
The installation of the air distributor must be
higher than the water-level in case that water can
come into the air blower pump (Fig.1)
The connection pipe of the air blower pump
must be temperature resistant.
The air blower pump must be installed
fixed, and the connect pipe must be fastened.
Check valve
Air Blower
32Loose union
Draining
Draining valve
(Fig. 1)
MANUAL
72dB.
Air-distributing pipe
Dimensions
152
170
Provided with coupling sleeves Ø32 or Ø50 mm.
Technical parameter list:
Power
Model
(W)
EOLO APD200
200
EOLO APD300
350
EOLO APD400
400
EOLO APD700
700
CAUT ION
The air blower pump must be grounded in order
to prevent electrical shock or injury.
The outlet of the air blower pump can't be
stuffed up when it's operating.
If the outlet air flow is too small, the air temp-
erature will increase. Pay attention to prevent
scald.
The power must be cut off before checking the
air blower pump.
- 3 -
62
96
234
Current(A)
Nozzle quantity
220-240V
110-120V
1.2
2.0
6-12
1.7
3.0
8-16
2.5
4.0
12-24
3.3
7.0
16-32
Publicidad
