BabySense Max View Manual Del Usuario página 9

3.4 Set Up
• Once both the Baby and Parent Units are switched on, the display on the Parent Unit will show the video captured by the Baby Unit(s).
• Baby Unit(s) are paired to the Parent Unit when supplied. There is no need to pair the units again unless the Baby Unit loses its link with the Parent
Unit. To renew the pairing of your units or pair a new/additional Baby Unit, follow the procedure described in "Section: Pairing the Baby Unit
(Camera) with the Parent Unit".
• The Baby Unit should be placed at least 6 feet away from the baby's crib on a flat surface. Alternatively, it can be wall mounted.
• Never place the Baby Unit inside the crib, bed or playpen.
• Make sure the unit and cords are out of reach of the baby and other young children.
• To avoid a strangulation hazard, the power cords should be secured and never hung on the crib or near the baby.
• Place the baby monitor in a place where the air can circulate freely and avoid blocking the ventilation and speaker openings.
• Aim the camera (s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor,
which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls
or obstructions between the camera and the monitor.
• To use your Parent Unit and Baby Unit together, you must be able to establish a radio link between them; the range may be affected by
environmental conditions/obstacles (See more details in Troubleshooting Section - "Interference or poor reception")
4. Operating the Monitor
4.1 Menu Icon Overview
Lullaby Temp Alert
VOX Clock
Brightness Timer
Camera Alert Volume
Setting Frequency Setting
Temp F/C Customer Support
ENG
9