Blanco drink.filter EVOL-S Pro Manual De Instrucciones página 20

Malfunctions
Malfunctions Possible causes
Blue LED on the mixer tap - Mixer tap is not receiving
is not lighting up electricity
- The volume wheel is at "0"
Water does not run when - Connecting hoses
the sensor is activated are kinked
- Connecting hoses
are wrongly attached
- The volume wheel is at "0"
- Filter head is connected
against the flow direction
- Electronic devices are
in front of the sensor
Cold and/or warm water - Connecting hoses
is not running are kinked
- Connecting hoses are
wrongly attached
The set water quantity - Malfunctions in the control
for filter or hot water is box
significantly different
38
Error correction
- Connect the power supply unit for the control
box to the mains
- Check the connections on the control box
- Turn the volume wheel and set
an amount > "0"
- Connect hoses without kinks
- Connect the hoses according to
the assembly instructions
- Turn the volume wheel and set
an amount > "0"
- Check whether the filter head has been
connected against the flow direction, and
change the flow direction
- Remove electronic devices
- Connect hoses without kinks
- Connect the hoses according to
the assembly instructions
- Unplug the power supply to the control box,
wait for 1 minute, then plug it in again
Cleaning
Do not use abrasive or chlorinated cleaning
products to clean the surfaces.
We recommend using BLANCO DailyClean
(item no. 526305) to clean the mixer tap. This is
easy to order from the BLANCO online shop.
39