Publicidad
Idiomas disponibles
Idiomas disponibles
• When in use: press point A and pull out the cover at the same time.
• When not in use: press the cover into the bottom of the robot.
STARTING OPERATION
1. Check before using:
- Make sure the dust bin is empty and that no dust is stuck in the intake.
- Make sure the intake valve is clear, if it is not, turn off the machine and wipe inside and
outside of the valve area. Make sure the filter is installed in the dust bin after cleaning.
2. Place the unit in an open space inside the room to clean.
ANTI-DROP FUNCTION CONFIGURATION
1. Make sure the battery is fully charged.
2. Please put the machine in the following
test position before use, the machine can be
used when it is moving backward.
Note: do not use the machine under strong
light or sunlight to avoid falling.
3. MAINTENANCE & CLEANING
CLEANING THE DUST BIN
1. Remove the dust bin by lifting up the cover as shown in the diagram.
Lift up the cover , take out the dust bin and
open the upper cover
2. Empty the dust bin:
• Open the dust bin upper cover.
• Take out the filter and empty the bin.
Publicidad
