Publicidad
Idiomas disponibles
Idiomas disponibles
Please provide the following information in the
event of any enquiries:
• Type of current for the motor
• Data of machine type plate
• Data of motor type plate
Service information
With this product, it is necessary to note that the following
parts are subject to natural or usage-related wear, or that the
following parts are required as consumables.
Wearing parts*: Carbon brushes, cutting roller, pressure plate
* may not be included in the scope of supply!
With accessories as well as wearing parts and replacement
parts use only original parts:
Carbon brushes: 3904409008
Cutting roller: 3904409009
Pressure plate: 3904409010
13. Storage
Store the device and its accessories in a dark, dry and frost-
free place that is inaccessible to children. The optimum stor-
age temperature lies between 5 and 30 ˚C.
Store the power tool in its original packaging.
Cover the power tool to protect it from dust or moisture. Store
the operating manual with the power tool.
14. Disposal and recycling
The device is supplied in packaging to avoid transport dam-
ages. This packaging is raw material and can thus be used
again or can be reintegrated into the raw material cycle.
15. Troubleshooting
Fault
Possible cause
Motor does not start
Collecting container not in correct position
Motor is overloaded
No mains voltage
Garden waste is not being
Cutting roller moves counterclockwise
drawn in
Chopped material is too soft
Cutting roller is blocked
Chopped material hang-
Pressure plate not adjusted correctly
ing together like a chain
12
GB/IE
The device and its accessories are made of different materi-
als, such as metals and plastics. Take defective components to
special waste disposal sites. Check with your specialist dealer
or municipal administration!
The packaging is wholly composed of environ-
mentally-friendly materials that can be disposed
of at a local recycling centre.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
electrical devices.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must not be dis-
posed of together with domestic waste in compliance
with the Directive (2012/19/EU) pertaining to waste
electrical and electronic equipment (WEEE). This product must
be handed over at the intended collection point. This can be
done, for example, by returning it when purchasing a similar
product or delivering it to an authorised collection point for the
recycling of old electrical and electronic devices. Improper
handling of waste equipment may have negative consequenc-
es for the environment and human health due to potentially
hazardous substances that are often contained in electrical
and electronic equipment. By properly disposing of this prod-
uct, you are also contributing to the effective use of natural
resources. You can obtain information on collection points for
waste equipment from your municipal administration, public
waste disposal authority, an authorised body for the disposal
of waste electrical and electronic equipment or your waste
disposal company.
Remedy
Insert collecting container correctly and check safety
switch
Switch the roller shredder on again
Have the socket, cable, lead and plug checked by a
qualified electrician (see Electrical connection)
Switch direction of rotation
Push in the chopped material with a special plug for the
roller shredder
Unblock
Readjusting the pressure plate
Publicidad
