Johnson JDRY Serie Manual De Instrucciones página 52

MAINTENANCE
Cleaning and Care
Empty the water container
1. Pull out and hold the water
container with two hands.
2. Tilt the water container, pour out
the condensate water into the
basin.
3. Install the water container.
Warning!
！
• Empty the water container after each use. Once the water container is
filled completely, the programme will be paused and the " " icon will
light. After the container is emptied, the dryer can be restarted by
pressing Iniciar/Pausar button.
• Do not drink the condensate water.
Clean the filters
This dryer has a primary door lint filter and a base filter in front of the heat exchanger
for additional protection. Make sure you clean the door filter after each cycle.
The base filter need to be cleaned after each fifth drying programme.
Clean the door filter
1. Open the door.
2. Take out the door filter.
3. Open the filter and remove the fluff on the
filter, You can clean it in running water.
4. Dry the door filter thoroughly before
installing it back.
Note!
• Take notice of the correct orientation
before to insert the door filter.
22
Door Filter
V.1