VALBERG UF NF 240 E S180C Instrucciones De Uso página 12

B
Installing your new appliance
Before using the appliance for the first time, you should be informed of the following tips.
WARNING
For proper installation, this freezer must be placed on a
level surface of hard material that is the same height as the
rest of the flooring. This surface should be strong enough
to support a fully loaded freezer.
The rollers, which are not castors, should be only used for forward or backward movement.
Moving the freezer sideways may damage your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of the cooling system and save energy, it is necessary to maintain
good ventilation around the appliance for the dissipation of heat. For this reason, sufficient
clear space should be available around the freezer.
Suggest: It is advisable for there to be 50-75mm of space from the back to the wall, at least
100mm from its top, at least 100mm from its side to the wall and a clear space in front to
allow the doors to open 130°. As shown in follow diagrams.
Using the appliance
5 EN