3
Description
3.1
Product overview
3.2
Intended use
The product described is a tower light with built-in tripod. The tower light is for lighting up jobsites and it
offers 360° illumination with at least 6500 lumen.
The tower light can be operated either cordless or with a supply cord.
•
For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
•
For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3
Items supplied
Tower light, shoulder strap, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4
Status indicators of the Liion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1
Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶ If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.
Short-press the release button of the battery to get whichever of the following status indications is applicable
at the time.
State of charge and, if applicable, faults are indicated constantly as long as the connected product is
switched on.
Status
Four (4) LEDs show constantly green
4
English
1
Light / lamp head
@
Bow-shaped grip of lamp head
;
Clamping lever for height adjustment
=
Eyelets for shoulder strap
%
Battery compartment lid
&
Battery state of charge indicator
(
Tripod legs
)
Carrying handle
+
Tripod lock release
§
Control panel
/
Light area indicator
:
Light area button
∙
On/off button
$
Brightness button
£
Brightness indicator
|
Socket with cover
¡
Battery release button
Q
Battery state of health indicator
W
Meaning
State of charge: 100 % to 71 %
2385040
*2385040*