TREVIDEA Girmi BL32 Manual Del Usuario página 10

- Do not subject the product to strong impacts, serious
damages may result.
- Do not use near or under flammable materials (like
curtains), heat, cold spots and steam.
GENERAL INFORMATION
Before using for the first time, carefully wash all the parts that will come in touch with food such as the
container. Always close the lid before every use.
- Never leave the appliance unattended while it is running.
- Use the kettle only to heat or boil water.
- Fill the kettle with cold water, being careful to stay within the limits indicated on the capacity of the
storage tank (maximum 1.2 L, 0.5 L minimum).
- Always pour the water before turning on the kettle. Never pour liquids after switching on.
- If the kettle operates when it's empty, the safety device shuts down automatically to prevent any damage. It
won't be possible to operate until the complete cooling of the resistance.
- After having boiled the water, remove plug and drain completely to avoid scaling of the electric resistance.
Once finished, unplug the unit and wait for the complete cooling of each part before storing or cleaning.
- Do not immerse appliance in water or other liquids. In any case, avoid splashing of water or other liquids.
- Put the kettle on stable shelves and floors.
DESCRIPTION BL32
1 Lid
4 Base
7 Nozzle with removable filter
MAIN FUNCTIONS
Before using, operate the kettle 2 or 3 times and boil the maximum amount of water (1.2 liters) by replacing
each time hot water with cold water. To open the lid, use the button (8).
OPERATING THE KETTLE
- Pour in the kettle the desired amount of water, never exceeding the limits indicated (MAX: 1.2 liters, MIN:
0.5 liters). Close the lid until it locks in position and connect the plug to the electric power outlet.
- Place the kettle on the slot of the power base (4).
- Operate the kettle by pressing the power ON button (2).
- When the liquid is boiling, the thermostat automatically turns off the unit.
- Use hot water as you wish, making sure to completely empty the kettle to prevent limescale on the internal
electric resistance.
CLEANING
Unplug the unit and wait until the complete cooling down of each part before starting cleaning
operations.
- Do not immerse the base and the kettle in water. In any case, prevent splashes of water or other liquids
from reaching those parts.
- To clean the inside of the kettle, let it cool down and rinse with warm water to remove residues and
impurities. In any case, it will be necessary to periodically descaling the unit.
- Clean the base and the kettle with a damp cloth.
DESCALING THE BOILER
To prevent the formation of lime scale, it is recommended to make periodic special cleaning, following the
instructions below:
2 Power on button
5 Container
8 Open-lid button
3 Handle
6 Transparent graduated window
9