Waterdrop WD-FC-01 Manual Del Usuario página 4

Installation Instructions
Remove your original faucet aerator if there is an aerator in your
faucet. Choose the right adapter to match your faucet threading, and
choose the appropriate Silicone Washer(I2).
How to Choose the Right Adapter
(a2) fits most internal threaded faucets.
If (a2) doesn't fit, try(a1) or(a3).
(b2) fits most external threaded faucets.
If (b2) doesn't fit, try(b1) or(b3).
Unscrew the Mounting Nut (D) from the Mounting Base (G)
by turning counter- clockwise. Then put the Mounting Nut(D)
on faucet.
Put the Silicone Washer (l2) into your chosen adapter. Then
wrap Teflon Tape(l3) around the joint of mounting base and the
faucet. You can hand-tighten the adapter. Do not over-tighten it.
NOTE: Please make sure an appropriate Silicone Washer (I2) is
installed into your chosen adapter to prevent water leakage.
Screw the Mounting Base (G) onto the Mounting Nut(D) firmly
by turning clockwise.