Publicidad
Idiomas disponibles
Idiomas disponibles
OPTIONAL DEMO SET UP
FOOTPAD/PUSH BUTTON IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Insert the cable from optional footpad/push button into the
jack labeled DEMO on the BASE.
2. Place the switch in the DEMO position to enable
DEMO activation.
3. Step on the FOOTPAD or press push button to activate the
scary sequence!
*
Footpads and push buttons are sold separately and can be
purchased at www.tekkyaccessories.com
OPTIONAL EXTERNAL SPEAKER SET UP
EXTERNAL SPEAKER IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Plug speaker cord into the jack labeled SPEAKER JACK
located on the BASE.
2. Use volume knob on external speaker to control volume levels.
CARE AND MAINTENANCE
• STORE IN A COOL AND DRY ENVIRONMENT.
• IN INCLEMENT WEATHER BRING ITEM INDOORS.
• SURFACE WASHABLE ONLY. DO NOT USE ANY HARSH OR ABRASIVE CLEANING AGENTS.
TROUBLESHOOTING
PROBLEM
Item will not
activate.
You only hear
item sound but no
item activation.
Item has no sound while
operating.
POSSIBLE CAUSE
• 5.9V 3A adapter is not plugged in.
• Switch on control box is not in the
ON position.
• Batteries not inserted or
inserted incorrectly.
• Control box wires are not connected
• Volume knob is turned all the way down.
• Check 5.9V 3A adapter is plugged in
and securely inserted into the control box.
• Move switch to ON position.
• Install batteries with positive and
negative terminals in the
correct positions.
• Check that wires labeled W, X, Y, Z and
• Adjust volume knob to desired volume.
Page 14
CORRECTIVE ACTION
Z1 are securely connected.
Publicidad
