PRIXTON TOSCANA Manual página 8

Before use
• Remove all packag ing elements.
• Inspect all parts of the appliance for visual damage. Unwind 1he power cord completely
and inspect it for damage . Do no t use the app liance if it or its cord have been damaged
or are not working properly. In case of damage. contact the official Technical Support
Service for advice, repairs or returns.
1. Fill the removable water tank to the MAX fill line with cold water and replace securely
on the back of unit.
Note: Do not exceed the maximum line of water marked on the tank.
Do not use the machine without water tank or water tank installed
2. Plug in the unit and press the ON/OFF button to tum unit ON. The light indicator will
stay bright.
3. The machine will start warming up and the light indicator of 1-coffee and 2-0Jffee will
start Hash ing until the pre•heating process is over.Once the appliance has reached its
optimal temperature. The light will stay bright.
4. Place filter for 1 or 2 cup in the filter holder. Insert filter holder until it slides all the way
to the b ack and cannot be
pushed in any further. (No ground coffee in filter)
5. Press the1-coflee or 2-coffee button , hot water will come out from the machine, use
the water to clean filters or cups. The water will stop when the light flashing.
Note: The maximum wate r delive ry time of 1-coffee is 15 seconds
The maximum water delivery time of 2-coflee is 28 seconds
This appliance is intended for household use only
How to use
Making coffee
1. Ad d 1 spoon (7g) of ground coffee for each cup being made. Press ground coffee
firmly with tamping tool and use a brush or a cloth to clear the filter's edge.
Note; Filter for 1 cup needs 1 spoon. Filter for 2 cup needs 2 spoons.
If the ground coffee is pressed too tightly, the coffee flows out slowly and the crema
becomes thick. If the ground coffee is pressed too loose, the coffee flows out quickly
and crema is insufficient and the color is light.
2. Insert filter holder until it slides all the way to the back and cannot be pushed in any
further. Place 1 or 2 empty cup on the removable grid
3. When the light indicator of 1-coflee or 2-coflee stays bright, press the 1-coffee or 2-
coffee button in order to prepare 1 or 2 cup coffee.
4. After making the coffee, press the on/off button to tum the machine off
5. Take the filter holder out through anticlockwise. Wash parts again with warm water.
Rinse and dry thoroughly.
Frothing milk/ making cappuccino
1. When the light indicators of 1-0Jffee and 2-coflee stop Hash ing and keep bright,
press the steam button. Once the light indicator of steam stops flashin g, the mach
ine is ready.
2. Fill a metal or ceremic cup with cold milk (100ML). A stainless steel cup and skim
milk are recommended.
3. Tum the steam control knob to the steam mark, release some steam to clean the
steam wand, then turn the steam control knob slowly in anti-clockwise for stopping
steam.
4. Hold cup underneath frothing nozzle, introduce the steam nozzle 5 mm Turn the
steam control knob to the steam mark, steam will come out from the frothing nozzle.
5. After doubling the milk capacity, introduce the steam nozzle deep into the cup. And
keep heating the milk to the desired temperature (60L' )
8