Publicidad
Idiomas disponibles
Idiomas disponibles
8.2
INSTALL THE BATTERY PACK
WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1.
Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
3.
When you hear a click, the battery pack is
installed.
9
This machine can also connect to the 12V power
outlet directly. Insert the 12V power cord (10) into
the 12V power outlet, this will automatically provide
continuous 12V current to your inflator.
10
8.3
REMOVE THE BATTERY PACK
1.
Push and hold the battery release button (9).
2.
Remove the battery pack from the machine.
8.4
SELECT THE MODE
High Pressure mode
English
TIP
10
Choose the high pressure mode to start the inflator
when you connect the air hose (high pressure) to the
item.
1.
Connect the quick connect valve adaptor (11) to
item you are inflating.
2.
Push down the valve lock lever to secure the
connection.
7
8
5
Low Pressure Mode
1.
Insert low pressure air hose (4) to the connector
port and rotate counterclockwise.
2.
Use your desired nozzle to inflate the item.
Choose the low pressure mode to start the inflator
when you connect the air hose (low pressure) to the
item.
4
Deflating Mode
1.
To deflating item, insert low pressure air hose (4)
to the air outlet (3).
2.
Use your desired nozzle to deflate the item.
Set the inflator to low pressure mode to deflate.
7
NOTE
11
NOTE
NOTE
EN
Publicidad
