Publicidad
Idiomas disponibles
Idiomas disponibles
4. Fixing the refrigerator to the cabinetry:
The refrigerator can be affixed to the RV cabinetry by installing the screws provided, or a similar Pan Head type where the
shank connects into the backer support by 25mm (1"). Screw into the holes on the inner compartment, as shown below:
5. Fixing the shelves in the refrigerator compartment:
The glass shelves in the refrigerator compartment are affixed in production for safety considerations.
6. Door and drawer function:
The refrigerator doors function as Swing Door style, the user can open the door from one side or the other. The Freezer is a
bottom drawer that slides out. All doors incorporate a self latching mechanism to retain the doors from opening during travel.
Ensure the latches and handles function properly
7. Leveling:
Make sure to level your refrigerator using the front leveling feet. If not leveled properly, the refrigerator door gasket's sealing
performance will be affected, or it may even lead to operating failure of your refrigerator.
8. Power-on:
After completing the standing time requirement, connect the refrigerator to the dedicated power supply battery in the RV,
then the compressor will start working. Open the freezer door after 1 hour to check operation. If the compartment's internal
temperature drops significantly, it indicates the refrigeration system is working normally.
Holes to fix the refrigerator to
the cabinet
Note: Center of mounting hole is
51mm (2") from the front edge of
the refrigerator cabinet.
- 6 -
CCD-0007849 Rev: 06-14-23
Publicidad
