Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Before first use
•
Fill the kettle with fresh water up to the MAX mark, then boil the water 2 or 3 times.
Discard the water after each cycle. This operation will eliminate any residue created
during the manufacturing process.
•
Due to the manufacturing process, the unit may emit a faint burning smell when first
turned on. This is completely normal and does not indicate the presence of a manufacturing
defect or that the product is dangerous.
•
Clean the unit (
Cleaning and maintenance).
Use
•
Remove the power cable from its storage space and unwind it.
•
Remove the kettle from the base.
•
To open the lid: press the release button.
•
Fill the kettle with water.
•
Do not exceed the MAX mark and do not fill it below the MIN mark.
•
To close the lid: press down on the lid.
•
Place the base on a flat surface.
•
Place the water-filled kettle on the base.
•
Plug the power cable into a mains socket.
•
Set the power button to I. The power indicator will light up. The kettle will begin to boil
the water.
•
The kettle turns off automatically once the water starts to boil. The power indicator will
turn off.
•
Unplug the power plug from the mains socket.
Note : The boiling process can be stopped manually at any time by switching the
I/O power switch to O.
CAUTION
• Do not open the lid when steam is escaping from the
spout.
• Exercise extreme caution when moving a unit containing
hot water.
Safety
•
The kettle is fitted with a safety device to prevent overheating. This overheating protection
device shuts down the unit if the water tank is empty or there is not enough water in it.
13
FR
Publicidad
