Emerio BR-211824.2 Manual De Instrucciones página 3

Instruction manual – English
PARTS DESCRIPTION
1. LCD display
2. Unit switch
3. Battery holder
BATTERY
Open the cover of battery holder which is located in the back of the scale, install the batteries (2 × 1.5V AAA
batteries ) into the holder.
Different types of batteries or new and used batteries are not to be mixed.
⚫
Batteries are to be inserted with the correct polarity.
⚫
Non-rechargeable batteries are not to be recharged.
⚫
Exhausted batteries are to be removed from the appliance and safely disposed of.
⚫
If the appliance is to be stored unused for a long period, the batteries should be removed.
⚫
The supply terminals are not to be short-circuited.
⚫
Keep new and used batteries out of the reach of children.
⚫
Do not ingest the batteries. If the battery is swallowed, it can cause severe internal harms.
⚫
OPERATION
STEP 1. Put the scale on a hard and flat surface (avoid carpet soft surface).
STEP 2. Gently step on the scale, then the scale will be automatically turned on. Stand evenly on the scale without
moving and wait until your weight shown on display is stable and locked.
Note: Do not step on the scale immediately after the unit is just moved. Wait for a few minutes and then step on
the scale to weigh yourself.
To convert weight unit
Press the unit switch in the back of the scale to convert the measurement between kg, lb and st.
AUTOMATIC SWITCH OFF
After you step off the scale, it will automatically switch off in a few seconds.
Caution
1. Please change new batteries when "Lo" appears on the LCD.
2. "Err" showed on LCD indicates overload or that the measuring makes an error.
ADVISE FOR USE & CARE
1. The glass platform will be slippery when it is wet. Keep it dry!
2. Keep standing still during the course of weighting.
3. Do not strike, shock or drop the scale.
4. Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT use chemical abrasive
cleaning agents.
5. Keep the scale in cool and dry place.
6. Always keep your scale in horizontal position.
7. If failed to turn on the scale, check whether battery is installed, or battery power is low. Insert or replace
new battery.
8. Remove the battery if the scale is not going to be used for a long time.
9. Do not use it for commercial purpose.
- 2 - BR-211824.2