Descargar Imprimir esta página

AIRFORCE DOMINO POP 30 Montaje Y Modo De Empleo página 22

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 72
EN
I
T
he device is equipped with a cooling fan. If there is a drawer under the built-in hob, an adequate
distance between the contents of the drawer and the underside of the appliance must be ensured
in order not to impair ventilation.
Do not store small objects or sheets of paper in the drawer under the hob, if any, which, if sucked
in, could break the fan and impair the cooling of the appliance, nor flammable or metal objects,
which could become incandescent or catch fire.
T
he work surface must be flat and horizontal. Cabinet cut-outs must be made before installing
the unit. Remove swarf to avoid impairing the function of electrical components.
Considering the ventilation of the hob, the following is necessary:
- a distance of 20 mm between the rear of the cabinet and the kitchen wall (Fig. 1-2).
- if the worktop is installed on a drawer, leave 65 mm between the drawer and the top of the
worktop (fig.1).
I
f the hob is mounted behind a cabinet door, operate it only when the door is open.
Only close the cabinet door when the appliance and residual heat indicators are switched off.
I
f the appliance is installed above an oven or an electric cooker equipped with a pyrolytic system,
it should not be operated while the pyrolytic process is in progress, as the cooker overheating
protection may be triggered.
T
he hob must not be installed above the dishwasher, as the steam emitted by the dishwasher
could cause the hob's electronic circuit to malfunction.
D
o not use any steam appliance, as steam could reach live parts and cause a short circuit.
A
ny work on or repairs to the appliance during the warranty period must only be carried out
by the manufacturer's authorised service centre, otherwise the warranty will be invalidated and
immediately void. Under no circumstances will the manufacturer's guarantee be acknowledged
for any subsequent problems.
Replace any faulty or defective parts with original spare parts: only these guarantee compliance
with safety standards.
W
arning for persons with pacemakers: be aware that an electromagnetic field is generated in
the immediate vicinity of the device in operation.
The possibility that the functioning of the pacemaker will be affected is very remote. If in doubt,
contact the pacemaker manufacturer or your doctor.
FUNZIONAMENTO
WARNINGS
22 22

Publicidad

loading